Vishay Siliconix
图片可能具有代表性。
产品详情请参阅规格.
IRFP360PBF
查看详情 数据表

IRFP360PBF

Product Overview

Category: Power MOSFET
Use: High power switching applications
Characteristics: High voltage, high current capability
Package: TO-247AC
Essence: Power transistor for high power applications
Packaging/Quantity: Available in tubes or reels

Specifications

  • Voltage - Rated: 400V
  • Current - Continuous Drain (Id) @ 25°C: 23A
  • Rds On (Max) @ Id, Vgs: 270 mOhm @ 12A, 10V
  • Vgs(th) (Max) @ Id: 4V @ 250µA
  • Gate Charge (Qg) @ Vgs: 110nC @ 10V
  • Input Capacitance (Ciss) @ Vds: 2100pF @ 25V
  • Power Dissipation (Max): 280W

Detailed Pin Configuration

The IRFP360PBF MOSFET has a standard TO-247AC package with three pins: Gate (G), Drain (D), and Source (S).

Functional Features

  • Low on-state resistance
  • Fast switching speed
  • High input impedance
  • Low gate drive power required

Advantages

  • Suitable for high power applications
  • Low conduction losses
  • High switching efficiency

Disadvantages

  • Higher cost compared to lower power MOSFETs
  • Requires careful handling due to high voltage and current capabilities

Working Principles

The IRFP360PBF operates based on the principle of field-effect. When a voltage is applied to the gate terminal, it creates an electric field that controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The IRFP360PBF is commonly used in: - Switch mode power supplies - Motor control - Inverters - Welding equipment - High power audio amplifiers

Detailed and Complete Alternative Models

  1. IRFP350PBF: Similar characteristics but lower voltage rating
  2. IRFP460PBF: Higher voltage and current rating
  3. IRFP250PBF: Lower voltage and current rating, suitable for medium power applications

In conclusion, the IRFP360PBF is a high-power MOSFET designed for demanding applications where high voltage and current capabilities are required. Its fast switching speed and low on-state resistance make it suitable for various power electronics applications.

[Word count: 295]

10个与IRFP360PBF在技术解决方案中的应用相关的常见问题及解答

  1. What is the maximum drain-source voltage of IRFP360PBF?

    • The maximum drain-source voltage of IRFP360PBF is 400 volts.

  2. What is the continuous drain current rating of IRFP360PBF?

    • The continuous drain current rating of IRFP360PBF is 23 amperes.

  3. What is the on-state resistance (RDS(on)) of IRFP360PBF?

    • The on-state resistance (RDS(on)) of IRFP360PBF is typically 0.18 ohms.

  4. What is the gate-source voltage (VGS) required to fully enhance IRFP360PBF?

    • The gate-source voltage (VGS) required to fully enhance IRFP360PBF is typically 10 volts.

  5. Can IRFP360PBF be used in high-frequency switching applications?

    • Yes, IRFP360PBF can be used in high-frequency switching applications due to its fast switching characteristics.

  6. What is the operating temperature range of IRFP360PBF?

    • The operating temperature range of IRFP360PBF is -55°C to 175°C.

  7. Is IRFP360PBF suitable for use in power supply and motor control applications?

    • Yes, IRFP360PBF is suitable for use in power supply and motor control applications due to its high current and voltage ratings.

  8. Does IRFP360PBF require a heatsink for proper thermal management?

    • Yes, IRFP360PBF may require a heatsink for proper thermal management, especially in high-power applications.

  9. What are the typical applications of IRFP360PBF in technical solutions?

    • Typical applications of IRFP360PBF include power inverters, welding equipment, UPS systems, and industrial automation.

  10. Are there any important considerations when designing with IRFP360PBF?

    • When designing with IRFP360PBF, it's important to consider proper gate drive circuitry, thermal management, and protection against overcurrent and overvoltage conditions.