Torex Semiconductor Ltd
图片可能具有代表性。
产品详情请参阅规格.
XC6122E716ER-G
查看详情 数据表

XC6122E716ER-G

Product Overview

Category

XC6122E716ER-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6122E716ER-G comes in a small surface-mount package.

Essence

The essence of XC6122E716ER-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

XC6122E716ER-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122E716ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6122E716ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Low quiescent current: The low quiescent current minimizes power consumption when the device is in standby mode.
  • Thermal shutdown protection: It includes thermal shutdown protection to prevent overheating.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • High efficiency results in minimal power loss during voltage regulation.
  • Wide input and output voltage ranges provide flexibility in various applications.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage of 150mV may affect the performance of sensitive devices.

Working Principles

XC6122E716ER-G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This ensures that connected devices receive a consistent and regulated voltage supply.

Detailed Application Field Plans

XC6122E716ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models to XC6122E716ER-G include: - XC6206P332MR-G - XC6219B332MR-G - XC6220B332MR-G - XC6221B332MR-G - XC6222B332MR-G

These models offer similar voltage regulation capabilities and can be considered as alternatives depending on specific requirements.

Word count: 400 words

10个与XC6122E716ER-G在技术解决方案中的应用相关的常见问题及解答

Sure! Here are 10 common questions and answers related to the application of XC6122E716ER-G in technical solutions:

  1. Question: What is XC6122E716ER-G?
    - Answer: XC6122E716ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122E716ER-G?
    - Answer: The operating voltage range of XC6122E716ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6122E716ER-G work?
    - Answer: XC6122E716ER-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal to indicate the voltage status.

  4. Question: What is the output type of XC6122E716ER-G?
    - Answer: XC6122E716ER-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.

  5. Question: What is the quiescent current consumption of XC6122E716ER-G?
    - Answer: The quiescent current consumption of XC6122E716ER-G is typically around 1.0µA, making it suitable for low-power applications.

  6. Question: Can XC6122E716ER-G be used for overvoltage protection?
    - Answer: No, XC6122E716ER-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.

  7. Question: What is the accuracy of XC6122E716ER-G?
    - Answer: The accuracy of XC6122E716ER-G is typically ±1.5% at room temperature.

  8. Question: Can XC6122E716ER-G be used in automotive applications?
    - Answer: Yes, XC6122E716ER-G is AEC-Q100 qualified and can be used in automotive applications that require undervoltage monitoring.

  9. Question: What is the package type of XC6122E716ER-G?
    - Answer: XC6122E716ER-G is available in a SOT-23-5 package, which is a small surface-mount package with five pins.

  10. Question: Are there any application notes or reference designs available for XC6122E716ER-G?
    - Answer: Yes, Torex Semiconductor provides application notes and reference designs on their website to help users understand and implement XC6122E716ER-G in their technical solutions.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.