XC6122C617MR-G

Product Overview

Category

XC6122C617MR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

• Input Voltage Range: 2.5V to 6.0V
• Output Voltage Range: 1.2V to 5.5V
• Maximum Output Current: 200mA
• Low Dropout Voltage: 150mV at 100mA
• Low Quiescent Current: 30µA (typical)
• Package Type: SOT-23-5
• Operating Temperature Range: -40°C to +85°C

Package and Quantity

XC6122C617MR-G is available in a SOT-23-5 package. It is typically sold in reels containing a quantity of 3000 units.

Specifications

• Input Voltage Range: 2.5V to 6.0V
• Output Voltage Range: 1.2V to 5.5V
• Output Current: Up to 200mA
• Dropout Voltage: 150mV at 100mA
• Quiescent Current: 30µA (typical)
• Line Regulation: ±0.3% (typical)
• Load Regulation: ±0.5% (typical)
• Ripple Rejection Ratio: 70dB (typical)
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The XC6122C617MR-G has a total of five pins arranged as follows:

```

---

| | --| |-- |____| ```

Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: EN (Enable) Pin 4: NC (No Connection) Pin 5: VOUT (Output Voltage)

Functional Features

• Low dropout voltage ensures efficient regulation even with small input-output voltage differentials.
• Low quiescent current minimizes power consumption in standby or idle modes.
• Wide input voltage range allows for flexibility in various applications.
• Excellent line and load regulation characteristics ensure stable output voltage under varying conditions.
• Good ripple rejection ratio reduces the impact of noise on the output voltage.

Advantages

• Compact SOT-23-5 package enables space-saving designs.
• Wide operating temperature range makes it suitable for a variety of environments.
• Low dropout voltage and quiescent current contribute to high efficiency and energy savings.
• Good line and load regulation provide stable output voltage for reliable circuit operation.
• High ripple rejection ratio enhances the performance of sensitive electronic devices.

Disadvantages

• Maximum output current of 200mA may not be sufficient for power-hungry applications.
• Limited pin configuration options restricts flexibility in circuit design.

Working Principles

The XC6122C617MR-G is a linear voltage regulator that utilizes a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage derived from the output. Any difference between the two voltages is amplified and used to adjust the pass transistor, maintaining a constant output voltage despite variations in the input voltage or load conditions.

Application Field Plans

The XC6122C617MR-G can be used in a wide range of applications, including but not limited to:

1. Battery-powered devices
2. Portable electronics
3. IoT devices
4. Automotive electronics
5. Industrial control systems
6. Medical equipment
7. Consumer electronics

Alternative Models

1. XC6206P332MR-G
2. XC6219B332MR-G
3. XC6220B332MR-G
4. XC6221B332MR-G
5. XC6222B332MR-G

These alternative models offer similar voltage regulation capabilities and package options, providing flexibility for different design requirements.

In conclusion, the XC6122C617MR-G is a voltage regulator with excellent characteristics such as low dropout voltage, low quiescent current, and wide input voltage range. It offers stable output voltage regulation and is suitable for various applications in different industries. However, its limited pin configuration and maximum output current may pose limitations in certain designs.