The TPS3851G18EDRBR belongs to the category of voltage supervisors.
This product is primarily used for monitoring and supervising voltage levels in electronic systems.
The TPS3851G18EDRBR is available in a 6-pin WSON package. It is typically sold in reels, with a quantity of 2500 units per reel.
The TPS3851G18EDRBR has the following pin configuration:
The TPS3851G18EDRBR operates by comparing the supply voltage against the user-defined threshold voltage. When the supply voltage falls below or rises above this threshold, the device generates a reset signal. The manual reset pin allows for additional control over the reset function, while the watchdog timer ensures system integrity by monitoring system activity.
The TPS3851G18EDRBR finds application in various fields, including but not limited to: - Power management systems - Industrial automation - Automotive electronics - Consumer electronics - Medical devices
Some alternative models that offer similar functionality to the TPS3851G18EDRBR include: - TPS3839G18DBVR - MAX823LEUK-T - ADM708TARZ
These models can be considered as alternatives based on specific requirements and design considerations.
In conclusion, the TPS3851G18EDRBR is a voltage supervisor that offers precise voltage monitoring, low power consumption, and flexible configuration options. Its small package size and wide operating temperature range make it suitable for various applications in different industries. However, designers should consider the limited pin count and absence of built-in hysteresis when selecting this device for their specific system requirements.
Word count: 511
Sure! Here are 10 common questions and answers related to the application of TPS3851G18EDRBR in technical solutions:
Q1: What is the TPS3851G18EDRBR? A1: The TPS3851G18EDRBR is a voltage supervisor and reset IC designed for monitoring power supply voltages in various applications.
Q2: What is the operating voltage range of TPS3851G18EDRBR? A2: The TPS3851G18EDRBR operates within a voltage range of 1.6V to 6.5V.
Q3: What is the purpose of using TPS3851G18EDRBR in a technical solution? A3: TPS3851G18EDRBR is used to monitor power supply voltages and generate a reset signal when the voltage falls below a certain threshold, ensuring proper system operation.
Q4: Can TPS3851G18EDRBR be used in battery-powered applications? A4: Yes, TPS3851G18EDRBR can be used in battery-powered applications as it has a low quiescent current and operates at low voltages.
Q5: How many voltage thresholds can TPS3851G18EDRBR monitor? A5: TPS3851G18EDRBR can monitor one voltage threshold, which can be set by an external resistor divider network.
Q6: What is the typical reset time delay of TPS3851G18EDRBR? A6: The typical reset time delay of TPS3851G18EDRBR is 200ms.
Q7: Does TPS3851G18EDRBR have an open-drain or push-pull output? A7: TPS3851G18EDRBR has an open-drain output, which allows for flexibility in connecting to different microcontrollers or devices.
Q8: Can TPS3851G18EDRBR tolerate voltage transients? A8: Yes, TPS3851G18EDRBR can tolerate voltage transients up to 40V without triggering a reset.
Q9: Is TPS3851G18EDRBR available in different package options? A9: Yes, TPS3851G18EDRBR is available in a small 6-pin WSON package.
Q10: What is the temperature range of operation for TPS3851G18EDRBR? A10: TPS3851G18EDRBR can operate within a temperature range of -40°C to +125°C.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.