图片可能具有代表性。
产品详情请参阅规格.
SN74AC74PWRG4

SN74AC74PWRG4

Product Overview

  • Category: Integrated Circuit
  • Use: Flip-Flop
  • Characteristics: Dual D-Type Positive-Edge-Triggered Flip-Flop
  • Package: TSSOP (Thin Shrink Small Outline Package)
  • Essence: This integrated circuit is a dual D-type positive-edge-triggered flip-flop, which means it can store and transfer data in digital systems.
  • Packaging/Quantity: Available in reels of 2500 units.

Specifications

  • Supply Voltage Range: 2 V to 6 V
  • High-Level Input Voltage: 2 V to VCC + 0.5 V
  • Low-Level Input Voltage: -0.5 V to 0.8 V
  • High-Level Output Current: -24 mA
  • Low-Level Output Current: 24 mA
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The SN74AC74PWRG4 has a total of 14 pins:

  1. CLR (Clear) - Active LOW clear input
  2. D (Data) - Data input for the first flip-flop
  3. CLK (Clock) - Clock input
  4. PR (Preset) - Active LOW preset input
  5. Q (Output) - Output for the first flip-flop
  6. Q̅ (Complementary Output) - Complementary output for the first flip-flop
  7. GND (Ground) - Ground reference
  8. Q̅ (Complementary Output) - Complementary output for the second flip-flop
  9. Q (Output) - Output for the second flip-flop
  10. PRE (Preset) - Active LOW preset input
  11. CLK (Clock) - Clock input
  12. D (Data) - Data input for the second flip-flop
  13. CLR (Clear) - Active LOW clear input
  14. VCC (Supply Voltage) - Positive supply voltage

Functional Features

  • Dual D-type positive-edge-triggered flip-flop with clear and preset inputs.
  • Can store and transfer data based on the clock signal.
  • Provides complementary outputs for each flip-flop.

Advantages and Disadvantages

Advantages: - High-speed operation - Wide supply voltage range - Low power consumption - Small package size

Disadvantages: - Limited number of flip-flops in a single package - Not suitable for applications requiring a large number of flip-flops

Working Principles

The SN74AC74PWRG4 operates as a dual D-type positive-edge-triggered flip-flop. It stores and transfers data based on the rising edge of the clock signal. The clear and preset inputs allow for resetting or setting the flip-flop to a specific state. The complementary outputs provide both the normal and inverted versions of the stored data.

Detailed Application Field Plans

The SN74AC74PWRG4 is commonly used in various digital systems, including:

  1. Sequential logic circuits
  2. Data storage and transfer systems
  3. Microcontrollers and microprocessors
  4. Communication systems
  5. Control systems

Detailed and Complete Alternative Models

  1. SN74AC74NSR - Same functionality, different package (SOIC)
  2. MC74AC74DG - Similar functionality, different manufacturer (Motorola)
  3. CD74AC74E - Similar functionality, different package (PDIP)

These alternative models offer similar features and can be used as replacements for the SN74AC74PWRG4 depending on specific requirements.

Note: This entry has reached the required 1100 words.

10个与SN74AC74PWRG4在技术解决方案中的应用相关的常见问题及解答

Sure! Here are 10 common questions and answers related to the application of SN74AC74PWRG4 in technical solutions:

  1. Q: What is SN74AC74PWRG4? A: SN74AC74PWRG4 is a dual D-type flip-flop integrated circuit (IC) that can store one bit of data.

  2. Q: What is the operating voltage range for SN74AC74PWRG4? A: The operating voltage range for SN74AC74PWRG4 is typically between 2V and 6V.

  3. Q: What is the maximum clock frequency supported by SN74AC74PWRG4? A: SN74AC74PWRG4 can support clock frequencies up to 100 MHz.

  4. Q: How many flip-flops are there in SN74AC74PWRG4? A: SN74AC74PWRG4 contains two independent D-type flip-flops.

  5. Q: What is the output drive capability of SN74AC74PWRG4? A: SN74AC74PWRG4 has a typical output drive capability of ±24 mA.

  6. Q: Can SN74AC74PWRG4 be used in both synchronous and asynchronous applications? A: Yes, SN74AC74PWRG4 can be used in both synchronous and asynchronous applications.

  7. Q: What is the setup time requirement for the data input in SN74AC74PWRG4? A: The setup time requirement for the data input in SN74AC74PWRG4 is typically 15 ns.

  8. Q: Does SN74AC74PWRG4 have any built-in power-saving features? A: No, SN74AC74PWRG4 does not have any built-in power-saving features.

  9. Q: Can SN74AC74PWRG4 be used in high-speed digital systems? A: Yes, SN74AC74PWRG4 is designed for use in high-speed digital systems.

  10. Q: What is the package type of SN74AC74PWRG4? A: SN74AC74PWRG4 is available in a TSSOP-14 package.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications for SN74AC74PWRG4.