Texas Instruments
图片可能具有代表性。
产品详情请参阅规格.
INA231AIYFDT
查看详情 数据表

INA231AIYFDT

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Current and Power Monitor
  • Characteristics:
    • High accuracy
    • Low power consumption
    • Small form factor
  • Package: QFN (Quad Flat No-leads)
  • Essence: Measures current and voltage to calculate power consumption
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +125°C
  • Current Measurement Range: ±4.08A
  • Voltage Measurement Range: 0V to 26V
  • Accuracy:
    • Current: ±0.1%
    • Voltage: ±0.4%
  • Resolution:
    • Current: 15.6µA
    • Voltage: 39.06mV

Pin Configuration

The INA231AIYFDT has a total of 16 pins. The pin configuration is as follows:

  1. V+ (Positive Supply Voltage)
  2. V- (Negative Supply Voltage)
  3. SDA (I2C Serial Data)
  4. SCL (I2C Serial Clock)
  5. ALERT (Alert Output)
  6. A0 (Address Select Bit 0)
  7. A1 (Address Select Bit 1)
  8. A2 (Address Select Bit 2)
  9. NC (No Connection)
  10. NC (No Connection)
  11. NC (No Connection)
  12. NC (No Connection)
  13. NC (No Connection)
  14. NC (No Connection)
  15. GND (Ground)
  16. VDD (Digital Supply Voltage)

Functional Features

  • Measures both current and voltage simultaneously
  • Provides digital output through I2C interface
  • Supports programmable alert thresholds for overcurrent and undervoltage conditions
  • Offers integrated shunt voltage and bus voltage amplifiers
  • Includes power calculation functionality

Advantages and Disadvantages

Advantages: - High accuracy measurements - Low power consumption - Small form factor for space-constrained applications - Programmable alert thresholds for customized monitoring

Disadvantages: - Limited current measurement range (±4.08A) - Limited voltage measurement range (0V to 26V)

Working Principles

The INA231AIYFDT works based on the principle of measuring the voltage drop across a shunt resistor to determine the current flowing through it. It also measures the voltage at the load to calculate the power consumption. By utilizing an internal amplifier, it provides accurate measurements with low power consumption.

Detailed Application Field Plans

The INA231AIYFDT is widely used in various applications that require current and power monitoring. Some of the detailed application field plans include:

  1. Battery-powered devices: Monitor battery current and power consumption to optimize battery life.
  2. Power management systems: Measure current and power in power supply circuits for efficient energy management.
  3. Industrial automation: Monitor current and power in motor control systems for performance analysis and fault detection.
  4. Solar energy systems: Track current and power generation in solar panels for monitoring system efficiency.
  5. Automotive electronics: Measure current and power in automotive circuits for diagnostics and performance optimization.

Detailed and Complete Alternative Models

  1. INA219: Similar functionality with a lower current measurement range (up to ±3.2A).
  2. INA240: Higher current measurement range (up to ±20A) with slightly lower accuracy.
  3. INA3221: Multi-channel current and voltage monitor with three independent channels.

These alternative models provide options based on specific requirements and offer similar features for current and power monitoring applications.

Word count: 345 words

10个与INA231AIYFDT在技术解决方案中的应用相关的常见问题及解答

Sure! Here are 10 common questions and answers related to the application of INA231AIYFDT in technical solutions:

  1. Q: What is the INA231AIYFDT? A: The INA231AIYFDT is a high-side current and voltage monitor with an I2C interface, commonly used for power monitoring in various technical solutions.

  2. Q: How does the INA231AIYFDT work? A: The INA231AIYFDT measures the voltage drop across a shunt resistor to calculate the current flowing through it. It also measures the bus voltage to calculate the power consumption.

  3. Q: What are the key features of the INA231AIYFDT? A: Some key features include high accuracy, low offset voltage, wide input voltage range, programmable alert thresholds, and I2C communication interface.

  4. Q: What are the typical applications of the INA231AIYFDT? A: The INA231AIYFDT is commonly used in applications such as battery management systems, power supplies, motor control, solar inverters, and IoT devices.

  5. Q: How accurate is the measurement provided by the INA231AIYFDT? A: The INA231AIYFDT has a high accuracy of typically ±0.1% for voltage and ±0.5% for current measurements.

  6. Q: Can the INA231AIYFDT measure both positive and negative currents? A: No, the INA231AIYFDT can only measure positive currents. For bidirectional current measurement, a different device or circuitry may be required.

  7. Q: Is the INA231AIYFDT capable of measuring high currents? A: Yes, the INA231AIYFDT can measure currents up to a maximum of 5A, making it suitable for a wide range of applications.

  8. Q: Can the INA231AIYFDT be powered from the same supply it is monitoring? A: Yes, the INA231AIYFDT can be powered from the same supply it is monitoring, as long as the voltage is within its specified operating range.

  9. Q: How can I communicate with the INA231AIYFDT using the I2C interface? A: The INA231AIYFDT uses the I2C protocol for communication. You can connect it to a microcontroller or other devices that support I2C and use appropriate libraries or code to read the measurements.

  10. Q: Are there any evaluation boards or reference designs available for the INA231AIYFDT? A: Yes, Texas Instruments provides evaluation modules and reference designs for the INA231AIYFDT, which can help in quickly prototyping and integrating the device into your technical solution.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.