The CD74ACT74M96 IC has a total of 14 pins, which are assigned as follows:
Advantages: - High-speed operation allows for efficient data processing - Low power consumption helps conserve energy - Individual clear and preset inputs provide flexibility in controlling the flip-flop states - Wide operating voltage range enables compatibility with different systems
Disadvantages: - Limited number of flip-flops (2) may restrict complex circuit designs - Propagation delay of 5.5 ns may affect timing-sensitive applications
The CD74ACT74M96 is a dual D-Type Flip-Flop that operates on positive-edge-triggered clock signals. Each flip-flop has an individual clear (CLR) input, preset (PRE) input, and data (D) input. The complementary outputs (Q and Q') change state based on the clock input and the data input.
When the clock signal transitions from low to high (positive edge), the data input is captured and stored in the flip-flop. The output then reflects the stored value until the next clock transition occurs. The clear and preset inputs allow for specific control over the flip-flop states, enabling synchronous or asynchronous resetting and setting of the outputs.
The CD74ACT74M96 IC finds applications in various digital logic circuits where flip-flops are required. Some common application fields include:
These alternative models provide similar functionality and can be used as substitutes for the CD74ACT74M96 in various applications.
Word count: 510 words
Sure! Here are 10 common questions and answers related to the application of CD74ACT74M96 in technical solutions:
Q: What is CD74ACT74M96? A: CD74ACT74M96 is a dual D-type flip-flop integrated circuit (IC) that can be used in various digital applications.
Q: What is the operating voltage range for CD74ACT74M96? A: The operating voltage range for CD74ACT74M96 is typically between 4.5V and 5.5V.
Q: What is the maximum clock frequency supported by CD74ACT74M96? A: CD74ACT74M96 can support clock frequencies up to 100 MHz.
Q: How many flip-flops are there in CD74ACT74M96? A: CD74ACT74M96 contains two independent D-type flip-flops.
Q: What is the output drive capability of CD74ACT74M96? A: CD74ACT74M96 has a typical output drive capability of ±24 mA.
Q: Can CD74ACT74M96 be used in both synchronous and asynchronous applications? A: Yes, CD74ACT74M96 can be used in both synchronous and asynchronous applications.
Q: What is the setup time requirement for the data input in CD74ACT74M96? A: The setup time requirement for the data input in CD74ACT74M96 is typically 10 ns.
Q: Does CD74ACT74M96 have any built-in power-saving features? A: No, CD74ACT74M96 does not have any built-in power-saving features.
Q: What is the package type for CD74ACT74M96? A: CD74ACT74M96 is available in a 14-pin SOIC (Small Outline Integrated Circuit) package.
Q: Can CD74ACT74M96 be cascaded to create larger counters or shift registers? A: Yes, CD74ACT74M96 can be cascaded with other flip-flops to create larger counters or shift registers.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for CD74ACT74M96.