图片可能具有代表性。
产品详情请参阅规格.
MC10EL52DT

MC10EL52DT

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal transmission and processing
  • Characteristics: High-speed, low-power, differential receiver
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: High-performance ECL (Emitter-Coupled Logic) receiver
  • Packaging/Quantity: Tape and reel packaging, 2500 units per reel

Specifications

  • Supply Voltage: -4.2V to -5.7V
  • Input Voltage Range: -3.0V to -5.7V
  • Output Voltage Range: -3.0V to -5.7V
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 1.6 ns (typical)
  • Input Current: ±20 mA (maximum)

Detailed Pin Configuration

The MC10EL52DT has the following pin configuration:

  1. VCC - Power supply voltage input
  2. Q - Differential output
  3. /Q - Complementary differential output
  4. GND - Ground reference
  5. D - Differential input
  6. /D - Complementary differential input
  7. VBB - Bias voltage input
  8. VEE - Negative power supply voltage input

Functional Features

  • High-speed differential receiver with ECL logic levels
  • Compatible with various ECL families
  • Wide input voltage range for flexibility in signal reception
  • Low power consumption for efficient operation
  • Differential outputs provide noise immunity and improved signal integrity

Advantages and Disadvantages

Advantages

  • High-speed operation enables fast data transmission
  • Low power consumption reduces energy usage
  • Wide input voltage range allows compatibility with different signal sources
  • Differential outputs provide noise rejection and better signal quality

Disadvantages

  • Requires negative power supply voltage, which may limit certain applications
  • ECL logic levels are not directly compatible with other common logic families

Working Principles

The MC10EL52DT is a high-performance ECL receiver that operates based on the principles of emitter-coupled logic. It receives differential input signals and converts them into corresponding differential output signals. The device utilizes biasing techniques to ensure proper operation within the specified voltage ranges.

Detailed Application Field Plans

The MC10EL52DT is commonly used in applications that require high-speed signal transmission and processing. Some specific application fields include:

  1. Telecommunications: Used in high-speed data communication systems, such as fiber optic networks and digital telephony.
  2. Data Centers: Employed in high-performance computing environments for efficient data transfer between servers and networking equipment.
  3. Test and Measurement: Utilized in test equipment to capture and analyze high-frequency signals accurately.
  4. Industrial Automation: Integrated into control systems for precise and reliable signal reception and processing.

Detailed and Complete Alternative Models

  1. MC100EL52: Similar high-speed ECL receiver with slightly different specifications.
  2. MC10EL51: Differential receiver with lower speed capabilities but wider supply voltage range.
  3. MC100EL57: Differential receiver with additional features like internal termination resistors.

Note: This entry provides an overview of the MC10EL52DT integrated circuit. For detailed technical information, please refer to the manufacturer's datasheet.

Word Count: 347

10个与MC10EL52DT在技术解决方案中的应用相关的常见问题及解答

Sure! Here are 10 common questions and answers related to the application of MC10EL52DT in technical solutions:

  1. Question: What is MC10EL52DT?
    Answer: MC10EL52DT is a high-speed differential ECL (Emitter-Coupled Logic) data flip-flop with set and reset functions.

  2. Question: What is the operating voltage range for MC10EL52DT?
    Answer: The operating voltage range for MC10EL52DT is typically between -4.2V and -5.7V.

  3. Question: What is the maximum data rate supported by MC10EL52DT?
    Answer: MC10EL52DT can support data rates up to 3.8 Gbps.

  4. Question: Can MC10EL52DT be used in both single-ended and differential applications?
    Answer: No, MC10EL52DT is specifically designed for differential applications.

  5. Question: What is the typical propagation delay of MC10EL52DT?
    Answer: The typical propagation delay of MC10EL52DT is around 400 ps.

  6. Question: Does MC10EL52DT have internal termination resistors?
    Answer: No, MC10EL52DT does not have internal termination resistors. External termination resistors are required for proper operation.

  7. Question: Can MC10EL52DT operate at high temperatures?
    Answer: Yes, MC10EL52DT has a wide temperature range and can operate reliably at high temperatures up to 125°C.

  8. Question: Is MC10EL52DT compatible with other logic families?
    Answer: MC10EL52DT is not directly compatible with other logic families like TTL or CMOS. Level shifting or conversion circuits may be required for interfacing with different logic families.

  9. Question: What are the typical applications of MC10EL52DT?
    Answer: MC10EL52DT is commonly used in high-speed data communication systems, clock distribution networks, and other applications requiring precise timing.

  10. Question: Are there any special considerations for PCB layout when using MC10EL52DT?
    Answer: Yes, it is important to follow the recommended PCB layout guidelines provided in the datasheet to minimize signal integrity issues and ensure proper performance of MC10EL52DT.