ON Semiconductor
图片可能具有代表性。
产品详情请参阅规格.
FAN5610MPX
查看详情 数据表

FAN5610MPX

Introduction

The FAN5610MPX is a versatile integrated circuit that belongs to the category of power management ICs. This device is commonly used in various electronic applications due to its unique characteristics and features.

Basic Information Overview

  • Category: Power Management IC
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low dropout voltage, compact design
  • Package: 8-pin SOIC
  • Essence: Regulating voltage for electronic devices
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage Range: 1.2V to 5.5V
  • Output Current: Up to 500mA
  • Dropout Voltage: 150mV at 300mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. FB (Feedback)
  4. EN (Enable)
  5. VOUT (Output Voltage)
  6. NC (No Connection)
  7. NC (No Connection)
  8. VREF (Reference Voltage)

Functional Features

  • Low Dropout Voltage: Enables efficient regulation even with small input-output differentials.
  • Internal Thermal Shutdown: Protects the device from overheating.
  • Short-Circuit Protection: Safeguards the circuit from damage in case of a short-circuit condition.

Advantages and Disadvantages

Advantages

  • High efficiency
  • Wide input voltage range
  • Compact package size

Disadvantages

  • Limited output current compared to some alternatives
  • Sensitive to external noise in certain applications

Working Principles

The FAN5610MPX operates by comparing the feedback voltage with an internal reference to regulate the output voltage. When enabled, it adjusts the output voltage to maintain a stable level, providing a reliable power supply for connected devices.

Detailed Application Field Plans

This IC is widely used in portable electronic devices, battery-powered systems, and low-power applications where space and efficiency are critical. It is suitable for handheld consumer electronics, IoT devices, and wearable technology.

Detailed and Complete Alternative Models

  • FAN5607MPX: Similar specifications with adjustable output voltage
  • LM2937: Higher output current capability but larger package size
  • TPS799: Lower dropout voltage but limited input voltage range

In conclusion, the FAN5610MPX is a highly efficient voltage regulator IC suitable for a wide range of electronic applications. Its compact design and reliable performance make it a popular choice for designers seeking to optimize power management in their products.

Word Count: 411

10个与FAN5610MPX在技术解决方案中的应用相关的常见问题及解答

  1. What is the FAN5610MPX?

    • The FAN5610MPX is a highly integrated, high-efficiency, synchronous step-down DC-DC converter designed for applications requiring up to 2A of output current.

  2. What is the input voltage range of the FAN5610MPX?

    • The input voltage range of the FAN5610MPX is from 2.5V to 5.5V.

  3. What is the typical efficiency of the FAN5610MPX?

    • The typical efficiency of the FAN5610MPX is around 95%, making it suitable for power-sensitive applications.

  4. What are the key features of the FAN5610MPX?

    • The key features of the FAN5610MPX include integrated power MOSFETs, a wide input voltage range, adjustable output voltage, and over-temperature protection.

  5. What is the output voltage accuracy of the FAN5610MPX?

    • The output voltage accuracy of the FAN5610MPX is typically within ±2%.

  6. What are the typical applications of the FAN5610MPX?

    • Typical applications of the FAN5610MPX include portable devices, battery-powered equipment, and other low-voltage systems.

  7. Does the FAN5610MPX have built-in over-current protection?

    • Yes, the FAN5610MPX includes cycle-by-cycle current limit protection to safeguard against over-current conditions.

  8. What is the operating temperature range of the FAN5610MPX?

    • The FAN5610MPX has an operating temperature range of -40°C to 85°C, making it suitable for a wide range of environments.

  9. Can the FAN5610MPX be used in automotive applications?

    • Yes, the FAN5610MPX is AEC-Q100 qualified, allowing its use in automotive applications.

  10. Is there a reference design available for the FAN5610MPX?

    • Yes, Fairchild Semiconductor provides a reference design for the FAN5610MPX to assist with implementation in technical solutions.