The 74AUP1G80GM,115 IC has the following pin configuration:
```
| | --| CLR Q |-- VCC --| D GND |-- CLK --| CP | |___________| ```
Advantages: - High-speed operation - Low power consumption - Wide operating voltage range - Noise immunity due to Schmitt-trigger action - Direct interface with TTL levels
Disadvantages: - Limited functionality as a single flip-flop - Not suitable for complex sequential logic circuits
The 74AUP1G80GM,115 is a single positive edge-triggered D-type flip-flop. It stores a single bit of data and transfers it to the output on the rising edge of the clock signal. The clear input (CLR) can be used to reset the flip-flop to a known state. The data input (D) determines the value stored in the flip-flop. The output (Q) reflects the stored value.
The 74AUP1G80GM,115 IC can be used in various applications, including: - Digital communication systems - Computer peripherals - Industrial control systems - Consumer electronics - Automotive electronics - Medical devices
Some alternative models that serve similar functions to the 74AUP1G80GM,115 IC include: - SN74LVC1G80DBVR - MC74VHC1G80DTT1G - TC7SZU04FUTE85LF
These alternatives offer similar features and can be used as replacements depending on specific requirements.
Word count: 275 words
Sure! Here are 10 common questions and answers related to the application of 74AUP1G80GM,115 in technical solutions:
Q1: What is the function of the 74AUP1G80GM,115? A1: The 74AUP1G80GM,115 is a single positive-edge triggered D-type flip-flop with reset. It can store a single bit of data and has a reset input.
Q2: What is the operating voltage range for the 74AUP1G80GM,115? A2: The operating voltage range for the 74AUP1G80GM,115 is from 0.8V to 3.6V.
Q3: Can the 74AUP1G80GM,115 be used in battery-powered applications? A3: Yes, the 74AUP1G80GM,115 can be used in battery-powered applications due to its low power consumption and wide operating voltage range.
Q4: What is the maximum clock frequency supported by the 74AUP1G80GM,115? A4: The 74AUP1G80GM,115 can support clock frequencies up to 500 MHz.
Q5: Does the 74AUP1G80GM,115 have any built-in protection features? A5: Yes, the 74AUP1G80GM,115 has built-in ESD protection, which helps protect against electrostatic discharge.
Q6: Can the 74AUP1G80GM,115 be used in high-speed data transmission applications? A6: Yes, the 74AUP1G80GM,115 can be used in high-speed data transmission applications due to its fast propagation delay and high-speed operation.
Q7: How many inputs does the 74AUP1G80GM,115 have? A7: The 74AUP1G80GM,115 has two inputs - a data input (D) and a reset input (R).
Q8: What is the output voltage level of the 74AUP1G80GM,115? A8: The output voltage level of the 74AUP1G80GM,115 is compatible with both CMOS and TTL logic levels.
Q9: Can the 74AUP1G80GM,115 be used in automotive applications? A9: Yes, the 74AUP1G80GM,115 is AEC-Q100 qualified, making it suitable for use in automotive applications.
Q10: Is the 74AUP1G80GM,115 available in different package options? A10: Yes, the 74AUP1G80GM,115 is available in various package options, such as SOT353 and XSON6.