图片可能具有代表性。
产品详情请参阅规格.
24LC21AT-I/SN

24LC21AT-I/SN

Product Overview

Category

The 24LC21AT-I/SN belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Electrically erasable: The 24LC21AT-I/SN can be erased and reprogrammed electronically, eliminating the need for physical erasure.
  • Non-volatile: The stored data remains intact even when power is removed.
  • High storage capacity: This chip has a storage capacity of XX kilobits (KB).
  • Low power consumption: It operates on low power, making it suitable for battery-powered devices.
  • I2C interface: The chip communicates using the Inter-Integrated Circuit (I2C) protocol.

Package

The 24LC21AT-I/SN comes in a small outline integrated circuit (SOIC) package, which ensures easy integration into electronic circuits.

Essence

The essence of the 24LC21AT-I/SN is its ability to provide reliable and non-volatile data storage in a compact form factor.

Packaging/Quantity

This chip is typically packaged in reels or tubes, with each reel containing XX units.

Specifications

  • Storage Capacity: XX kilobits (KB)
  • Operating Voltage: X.X volts
  • Operating Temperature Range: -XX°C to +XX°C
  • Data Retention: Up to XX years
  • Write Endurance: XX,XXX cycles

Pin Configuration

The 24LC21AT-I/SN has a total of 8 pins, each serving a specific function:

  1. VCC: Power supply voltage input
  2. SDA: Serial data input/output pin for I2C communication
  3. SCL: Serial clock input pin for I2C communication
  4. A0: Address bit 0 for device addressing
  5. A1: Address bit 1 for device addressing
  6. WP: Write protect pin to enable/disable write operations
  7. VSS: Ground connection
  8. NC: No connection (unused pin)

Functional Features

  • Random access: The chip allows random access to any memory location, enabling efficient data retrieval.
  • Page write mode: It supports page write operations, allowing multiple bytes of data to be written in a single operation.
  • Software write protection: The write protect pin (WP) can be used to prevent accidental or unauthorized write operations.
  • Self-timed programming cycle: The chip automatically manages the timing of write and erase operations, simplifying the programming process.

Advantages and Disadvantages

Advantages

  • Non-volatile storage: Data remains intact even during power loss.
  • Compact form factor: The small package size enables integration into space-constrained designs.
  • Low power consumption: Suitable for battery-powered devices.
  • Easy integration: Supports I2C communication protocol.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively slower read/write speeds compared to volatile memory.

Working Principles

The 24LC21AT-I/SN utilizes electrically erasable technology to store and retrieve data. It consists of an array of memory cells that can be individually programmed or erased using electrical signals. The chip communicates with the host device through the I2C interface, allowing for easy integration and control.

Detailed Application Field Plans

The 24LC21AT-I/SN finds applications in various fields, including: - Embedded systems: Used for storing configuration data, firmware updates, and user settings. - Automotive electronics: Enables data storage for vehicle diagnostics, infotainment systems, and security modules. - Industrial automation: Stores critical parameters, calibration data, and production logs. - Consumer electronics: Used in devices like smart TVs, set-top boxes, and gaming consoles for storing user preferences and application data.

Detailed and Complete Alternative Models

  • 24LC01B-I/SN: 1 kilobit (KB) EEPROM chip with similar features but lower storage capacity.
  • 24LC256-I/SN: 256 kilobits (KB) EEPROM chip with higher storage capacity.
  • 24AA32A-I/SN: 32 kilobits (KB) EEPROM chip with additional write protection features.

Note: The above alternative models are just a few examples, and there are several other options available in the market.

In conclusion, the 24LC21AT-I/SN is an electrically erasable programmable read-only memory (EEPROM) chip that offers reliable non-volatile data storage in a compact form factor. With its I2C interface, low power consumption, and various functional features, it finds applications in diverse fields. While it has limitations in terms of storage capacity and speed, there are alternative

10个与24LC21AT-I/SN在技术解决方案中的应用相关的常见问题及解答

  1. What is the maximum clock frequency for 24LC21AT-I/SN?
    - The maximum clock frequency for 24LC21AT-I/SN is 400 kHz.

  2. What is the operating voltage range for 24LC21AT-I/SN?
    - The operating voltage range for 24LC21AT-I/SN is 1.7V to 5.5V.

  3. Can 24LC21AT-I/SN be used in automotive applications?
    - Yes, 24LC21AT-I/SN is AEC-Q100 qualified and suitable for automotive applications.

  4. What is the typical write cycle time for 24LC21AT-I/SN?
    - The typical write cycle time for 24LC21AT-I/SN is 5 ms.

  5. Is 24LC21AT-I/SN compatible with I2C protocol?
    - Yes, 24LC21AT-I/SN is compatible with I2C protocol.

  6. What is the storage temperature range for 24LC21AT-I/SN?
    - The storage temperature range for 24LC21AT-I/SN is -65°C to 150°C.

  7. Can 24LC21AT-I/SN be used in industrial control systems?
    - Yes, 24LC21AT-I/SN is suitable for use in industrial control systems.

  8. What is the maximum data transfer rate for 24LC21AT-I/SN?
    - The maximum data transfer rate for 24LC21AT-I/SN is 100 kHz at 1.7V and 400 kHz at 5.5V.

  9. Does 24LC21AT-I/SN have built-in write protection?
    - Yes, 24LC21AT-I/SN features a built-in hardware write protection.

  10. Is 24LC21AT-I/SN RoHS compliant?
    - Yes, 24LC21AT-I/SN is RoHS compliant.