Meixin Integrated
图片可能具有代表性。
产品详情请参阅规格.
DS1863E+T&R
查看详情 数据表

DS1863E+T&R

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: T&R (Tape and Reel)
  • Essence: Voltage Regulator
  • Packaging/Quantity: 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.6V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The DS1863E+T&R has the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. VOUT: Output Voltage
  5. FB: Feedback Pin
  6. SS: Soft-Start Pin
  7. PG: Power Good Indicator

Functional Features

  • High efficiency voltage regulation
  • Low power consumption
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start functionality for smooth power-up
  • Power good indicator for system monitoring

Advantages and Disadvantages

Advantages

  • High efficiency results in reduced power dissipation
  • Wide input voltage range allows for versatile applications
  • Low quiescent current minimizes standby power consumption
  • Overcurrent and thermal shutdown protection enhance system reliability
  • Soft-start feature prevents inrush current during startup
  • Power good indicator enables easy system monitoring

Disadvantages

  • Limited maximum output current of 500mA
  • Dropout voltage of 200mV may affect performance in low voltage applications

Working Principles

The DS1863E+T&R is a voltage regulator that takes an input voltage within the range of 2.7V to 5.5V and provides a regulated output voltage between 1.2V and 3.6V. It achieves high efficiency by utilizing a low dropout (LDO) architecture. The device operates in a quiescent state with a low current consumption of 50µA, making it suitable for battery-powered applications.

The regulator incorporates overcurrent protection, which safeguards the circuit from excessive current flow. Additionally, it features thermal shutdown protection, which prevents damage due to excessive heat. The soft-start functionality ensures a controlled startup by gradually increasing the output voltage, avoiding sudden current surges.

The power good indicator provides a signal indicating whether the output voltage is within the desired range, allowing for easy system monitoring and fault detection.

Detailed Application Field Plans

The DS1863E+T&R is widely used in various applications requiring voltage regulation, such as:

  1. Portable electronic devices: Smartphones, tablets, portable media players
  2. IoT devices: Wearable devices, smart home appliances
  3. Industrial equipment: Sensors, control systems, motor drives
  4. Automotive electronics: Infotainment systems, navigation systems, lighting control

Detailed and Complete Alternative Models

  1. LM1117-3.3: Voltage regulator with a fixed output voltage of 3.3V
  2. LT1763: Low dropout linear regulator with adjustable output voltage
  3. TPS7A4700: High-performance LDO voltage regulator with ultra-low noise

These alternative models offer similar functionality and can be considered as substitutes for the DS1863E+T&R in different applications.

Word count: 439 words

10个与DS1863E+T&R在技术解决方案中的应用相关的常见问题及解答

Sure! Here are 10 common questions and answers related to the application of DS1863E+T&R in technical solutions:

  1. Q: What is DS1863E+T&R? A: DS1863E+T&R is a specific model of a digital temperature sensor and thermostat manufactured by Maxim Integrated.

  2. Q: What are the key features of DS1863E+T&R? A: Some key features of DS1863E+T&R include high accuracy temperature sensing, programmable temperature thresholds, and nonvolatile memory for storing configuration settings.

  3. Q: How can DS1863E+T&R be used in technical solutions? A: DS1863E+T&R can be used in various technical solutions that require accurate temperature monitoring and control, such as HVAC systems, industrial equipment, and consumer electronics.

  4. Q: How does DS1863E+T&R measure temperature? A: DS1863E+T&R uses an integrated temperature sensor to measure the ambient temperature accurately.

  5. Q: Can DS1863E+T&R be interfaced with microcontrollers or other digital systems? A: Yes, DS1863E+T&R has a digital interface (I2C or SMBus) that allows it to communicate with microcontrollers or other digital systems.

  6. Q: Is DS1863E+T&R suitable for battery-powered applications? A: Yes, DS1863E+T&R has low power consumption and can be used in battery-powered applications.

  7. Q: Can DS1863E+T&R provide temperature alerts or trigger actions based on temperature thresholds? A: Yes, DS1863E+T&R supports programmable temperature thresholds and can generate alerts or trigger actions when those thresholds are crossed.

  8. Q: Does DS1863E+T&R have any built-in memory for storing configuration settings? A: Yes, DS1863E+T&R has nonvolatile memory that can store configuration settings even when power is removed.

  9. Q: Can DS1863E+T&R be used in harsh environments or extreme temperatures? A: DS1863E+T&R has a wide operating temperature range and can be used in harsh environments, but it is always recommended to check the datasheet for specific details.

  10. Q: Are there any application notes or technical resources available for DS1863E+T&R? A: Yes, Maxim Integrated provides application notes, datasheets, and technical resources on their website that provide detailed information on using DS1863E+T&R in various applications.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases of DS1863E+T&R in different technical solutions.