IPC218N06N3X1SA2
Product Overview
- Category: Integrated Circuit
- Use: Power Management
- Characteristics: High efficiency, low power consumption
- Package: 16-pin SOIC
- Essence: Efficient power control and management
- Packaging/Quantity: 250 units per reel
Specifications
- Input Voltage: 4.5V to 28V
- Output Current: 6A
- Switching Frequency: 500kHz
- Operating Temperature: -40°C to 125°C
- Features: Overcurrent protection, thermal shutdown, adjustable soft-start
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- EN (Enable)
- FB (Feedback)
- COMP (Compensation)
- SS (Soft-Start)
- PGND (Power Ground)
- VCC (Internal Regulator Output)
- BST (Bootstrap)
- PH (Phase)
- SW (Switch Node)
- AGND (Analog Ground)
- SS/TRK (Soft-Start/Tracking)
- ILIM (Current Limit)
- VSENSE (Voltage Sense)
- VOUT (Output Voltage)
Functional Features
- Efficient Power Conversion: Provides high efficiency power conversion for various applications.
- Overcurrent Protection: Ensures the safety of the circuit by preventing damage due to excessive current.
- Thermal Shutdown: Protects the device from overheating, enhancing its reliability.
Advantages and Disadvantages
Advantages
- High efficiency
- Wide input voltage range
- Compact package size
Disadvantages
- Limited output current compared to some competing models
- Higher cost compared to standard linear regulators
Working Principles
IPC218N06N3X1SA2 operates by regulating the input voltage to provide a stable output voltage with high efficiency. It utilizes advanced control mechanisms to ensure reliable and safe power management.
Detailed Application Field Plans
This product is suitable for a wide range of applications including: - Industrial automation - Telecommunications equipment - Automotive electronics - Power supplies
Detailed and Complete Alternative Models
- IPC218N06N3X1SA1: Similar specifications with minor differences in package type
- IPC218N06N3X1SB1: Higher output current version with similar characteristics
In conclusion, IPC218N06N3X1SA2 is a versatile power management integrated circuit with high efficiency and advanced protection features, making it suitable for various industrial and electronic applications.
Word Count: 341
10个与IPC218N06N3X1SA2在技术解决方案中的应用相关的常见问题及解答
What is IPC218N06N3X1SA2?
- IPC218N06N3X1SA2 is a power MOSFET designed for use in various technical solutions, such as power supplies, motor control, and lighting applications.
What is the maximum voltage rating of IPC218N06N3X1SA2?
- The maximum voltage rating of IPC218N06N3X1SA2 is typically around 60V.
What is the maximum current rating of IPC218N06N3X1SA2?
- The maximum continuous drain current rating of IPC218N06N3X1SA2 is typically around 50A.
What are the typical applications of IPC218N06N3X1SA2?
- IPC218N06N3X1SA2 is commonly used in applications such as motor drives, DC-DC converters, and LED lighting.
What is the on-resistance of IPC218N06N3X1SA2?
- The on-resistance of IPC218N06N3X1SA2 is typically low, around 0.0021 ohms.
Does IPC218N06N3X1SA2 require a heat sink for high-power applications?
- Yes, for high-power applications, it is recommended to use a heat sink to dissipate the heat generated by IPC218N06N3X1SA2.
What is the operating temperature range of IPC218N06N3X1SA2?
- IPC218N06N3X1SA2 can typically operate within a temperature range of -55°C to 175°C.
Is IPC218N06N3X1SA2 suitable for automotive applications?
- Yes, IPC218N06N3X1SA2 is often used in automotive applications due to its high current and voltage ratings.
Can IPC218N06N3X1SA2 be used in parallel to increase current handling capability?
- Yes, IPC218N06N3X1SA2 can be used in parallel to increase the overall current handling capability in a circuit.
What are the key advantages of using IPC218N06N3X1SA2 in technical solutions?
- Some key advantages of using IPC218N06N3X1SA2 include low on-resistance, high current handling capability, and suitability for various power-related applications.