IDT74FCT807CTSO

Overview

• Category: Integrated Circuit
• Use: Logic Level Converter
• Characteristics: High-speed, low-power consumption
• Package: TSO (Thin Shrink Outline)
• Essence: Bi-directional voltage level translator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications and Parameters

• Supply Voltage: 4.5V to 5.5V
• Input Voltage Range: 0V to VCC
• Output Voltage Range: 0V to VCC
• Operating Temperature Range: -40°C to +85°C
• Propagation Delay Time: 2.5ns (max)
• Output Drive Capability: ±24mA

Pin Configuration

The IDT74FCT807CTSO has a total of 20 pins. The pin configuration is as follows:

1. OE (Output Enable)
2. A1 (Input/Output A1)
3. B1 (Input/Output B1)
4. GND (Ground)
5. A2 (Input/Output A2)
6. B2 (Input/Output B2)
7. VCC (Supply Voltage)
8. A3 (Input/Output A3)
9. B3 (Input/Output B3)
10. NC (No Connection)
11. A4 (Input/Output A4)
12. B4 (Input/Output B4)
13. NC (No Connection)
14. A5 (Input/Output A5)
15. B5 (Input/Output B5)
16. NC (No Connection)
17. A6 (Input/Output A6)
18. B6 (Input/Output B6)
19. NC (No Connection)
20. GND (Ground)

Functional Characteristics

The IDT74FCT807CTSO is a bi-directional voltage level translator designed to convert logic signals between different voltage levels. It allows seamless communication between devices operating at different voltage levels, ensuring compatibility and reliable data transfer.

Advantages and Disadvantages

Advantages: - High-speed operation - Low-power consumption - Bi-directional translation - Wide supply voltage range

Disadvantages: - Limited output drive capability - Requires external control for enabling/disabling the outputs

Applicable Range of Products

The IDT74FCT807CTSO is widely used in various electronic systems where voltage level conversion is required. It finds applications in microcontrollers, digital interfaces, communication modules, and other devices that need to interface with components operating at different voltage levels.

Working Principles

The IDT74FCT807CTSO utilizes a combination of MOSFETs and CMOS technology to achieve voltage level translation. It employs a bidirectional architecture, allowing seamless translation of logic signals between two voltage domains.

Detailed Application Field Plans

1. Microcontroller interfacing with peripherals operating at different voltage levels.
2. Communication modules connecting devices with varying voltage requirements.
3. Digital interfaces between different integrated circuits.
4. Sensor networks requiring voltage level translation.
5. Industrial automation systems integrating components with different voltage specifications.

Detailed Alternative Models

1. IDT74FCT805CTSO: 8-bit bidirectional voltage level translator.
2. IDT74FCT809CTSO: 16-bit bidirectional voltage level translator.
3. IDT74FCT811CTSO: 32-bit bidirectional voltage level translator.
4. IDT74FCT813CTSO: 64-bit bidirectional voltage level translator.
5. IDT74FCT815CTSO: 128-bit bidirectional voltage level translator.

5 Common Technical Questions and Answers

1. Q: What is the maximum operating temperature of the IDT74FCT807CTSO? A: The maximum operating temperature is -40°C to +85°C.

2. Q: Can I use this IC to convert between 3.3V and 5V logic levels? A: Yes, the IDT74FCT807CTSO supports voltage level translation between 3.3V and 5V.

3. Q: What is the typical propagation delay of this device? A: The typical propagation delay is 1.5ns.

4. Q: Does this IC require external pull-up or pull-down resistors? A: No, the IDT74FCT807CTSO has built-in pull-up and pull-down resistors.

5. Q: Can I use this IC in automotive applications? A: Yes, the IDT74FCT807CTSO is suitable for automotive applications with its wide operating temperature range and robust design.

This concludes the encyclopedia entry for the IDT74FCT807CTSO.