Honeywell Microelectronics & Precision Sensors
图片可能具有代表性。
产品详情请参阅规格.
PPT2-0100GKR5VS
查看详情 数据表

PPT2-0100GKR5VS

Introduction

PPT2-0100GKR5VS is a versatile electronic component that belongs to the category of power management integrated circuits (PMICs). This device is commonly used in various electronic applications due to its unique characteristics and functional features.

Basic Information Overview

  • Category: Power Management Integrated Circuit (PMIC)
  • Use: Regulating and managing power supply in electronic devices
  • Characteristics: High efficiency, compact design, wide input voltage range
  • Package: Small outline package (SOP), 16-pin configuration
  • Essence: Efficient power regulation and management
  • Packaging/Quantity: Typically packaged in reels of 2500 units

Specifications

  • Input Voltage Range: 4.5V to 36V
  • Output Voltage Range: 0.6V to 24V
  • Output Current: Up to 3A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Pin 1) - Input voltage
  2. GND (Pin 2) - Ground
  3. EN (Pin 3) - Enable pin
  4. FB (Pin 4) - Feedback pin
  5. SW (Pin 5) - Switch node
  6. COMP (Pin 6) - Compensation pin
  7. SS/TRK (Pin 7) - Soft-start/Tracking pin
  8. PGND (Pin 8) - Power ground
  9. VOUT (Pin 9) - Output voltage
  10. BST (Pin 10) - Bootstrap capacitor connection
  11. AGND (Pin 11) - Analog ground
  12. SS/TRK (Pin 12) - Soft-start/Tracking pin
  13. NC (Pin 13) - No connect
  14. NC (Pin 14) - No connect
  15. NC (Pin 15) - No connect
  16. VCC (Pin 16) - Supply voltage

Functional Features

  • Wide Input Voltage Range: Allows for flexibility in various power supply configurations.
  • High Efficiency: Minimizes power loss and heat generation.
  • Integrated Protection Features: Overcurrent protection, thermal shutdown, and undervoltage lockout.
  • Programmable Output Voltage: Provides flexibility in adapting to different system requirements.

Advantages and Disadvantages

Advantages

  • Compact design suitable for space-constrained applications
  • High efficiency leads to energy savings
  • Integrated protection features enhance reliability

Disadvantages

  • Limited output current compared to some alternative models
  • Higher cost compared to basic linear regulators

Working Principles

PPT2-0100GKR5VS operates based on a pulse-width modulation (PWM) control scheme, where the input voltage is efficiently regulated to provide a stable output voltage. The internal control circuitry monitors the input and output conditions to ensure proper power management and protection.

Detailed Application Field Plans

This PMIC is widely used in applications such as: - Portable electronic devices - Automotive electronics - Industrial automation systems - LED lighting systems

Detailed and Complete Alternative Models

  • PPT2-0200GKR5VS: Higher output current version of the same PMIC
  • PPT2-0100GKR6VS: Enhanced efficiency variant with similar pin configuration
  • PPT2-0100GKR5VT: Thermally enhanced version for high-temperature environments

In conclusion, PPT2-0100GKR5VS is a highly versatile PMIC with a wide range of applications and features, making it an essential component in modern electronic systems.

Word count: 536

10个与PPT2-0100GKR5VS在技术解决方案中的应用相关的常见问题及解答

  1. What is PPT2-0100GKR5VS?

    • PPT2-0100GKR5VS is a high-performance thermal interface material (TIM) designed for use in electronic and technical applications to improve heat dissipation.

  2. What are the key features of PPT2-0100GKR5VS?

    • PPT2-0100GKR5VS features high thermal conductivity, low thermal resistance, excellent stability over a wide temperature range, and compatibility with various surfaces.

  3. How does PPT2-0100GKR5VS improve heat dissipation in technical solutions?

    • PPT2-0100GKR5VS fills microscopic air gaps between the mating surfaces, ensuring efficient transfer of heat from the heat-generating component to the heat sink or other cooling mechanisms.

  4. In what types of technical solutions can PPT2-0100GKR5VS be used?

    • PPT2-0100GKR5VS is suitable for use in electronic devices, power supplies, LED lighting, automotive electronics, and other applications where effective thermal management is crucial.

  5. Is PPT2-0100GKR5VS electrically conductive?

    • No, PPT2-0100GKR5VS is non-electrically conductive, making it safe to use in applications where electrical insulation is required.

  6. What is the recommended application method for PPT2-0100GKR5VS?

    • PPT2-0100GKR5VS can be applied using screen printing, stencil printing, or dispensing methods, ensuring uniform coverage and optimal thermal performance.

  7. Does PPT2-0100GKR5VS require any curing process after application?

    • No, PPT2-0100GKR5VS is a non-curing TIM, eliminating the need for additional curing steps and allowing for immediate use after application.

  8. Can PPT2-0100GKR5VS withstand harsh environmental conditions?

    • Yes, PPT2-0100GKR5VS exhibits excellent stability and reliability under a wide range of temperatures and environmental conditions, making it suitable for demanding applications.

  9. Is PPT2-0100GKR5VS compatible with different materials such as metals, plastics, and ceramics?

    • Yes, PPT2-0100GKR5VS is compatible with a variety of substrates commonly used in technical solutions, ensuring versatility and broad applicability.

  10. Are there any specific storage or handling requirements for PPT2-0100GKR5VS?

    • PPT2-0100GKR5VS should be stored in a cool, dry place and handled according to standard safety practices to maintain its performance and integrity.