Diodes Incorporated
图片可能具有代表性。
产品详情请参阅规格.
MMSZ5263B-7-F
查看详情 数据表

MMSZ5263B-7-F

Introduction

The MMSZ5263B-7-F is a diode belonging to the category of Zener diodes. It is commonly used for voltage regulation and protection in various electronic circuits. This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models of the MMSZ5263B-7-F.

Basic Information Overview

  • Category: Zener Diode
  • Use: Voltage regulation and protection
  • Characteristics: Low leakage current, precise voltage regulation
  • Package: SOD-123
  • Essence: Zener diode for voltage regulation
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Voltage - Zener (Nom) (Vz): 3.3V
  • Power - Max: 500mW
  • Impedance (Max) (Zzt): 20 Ohm
  • Current - Reverse Leakage @ Vr: 100nA @ 1V
  • Operating Temperature: -65°C ~ 150°C

Detailed Pin Configuration

The MMSZ5263B-7-F has two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

  • Precise voltage regulation at 3.3V
  • Low reverse leakage current
  • High power dissipation capability
  • Wide operating temperature range

Advantages and Disadvantages

Advantages

  • Accurate voltage regulation
  • Small form factor
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation capability
  • Sensitive to overvoltage conditions

Working Principles

The MMSZ5263B-7-F operates based on the Zener effect, where it maintains a constant voltage across its terminals when reverse-biased. This allows it to regulate the voltage in a circuit and protect sensitive components from overvoltage conditions.

Detailed Application Field Plans

The MMSZ5263B-7-F is widely used in various applications including: - Voltage regulators - Overvoltage protection circuits - Power management systems - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the MMSZ5263B-7-F include: - BZX84C3V3LT1G - 1N4728A - BZT52C3V3S-7-F - MM3Z3V3ST1G

In conclusion, the MMSZ5263B-7-F Zener diode offers precise voltage regulation and protection in a compact package, making it suitable for a wide range of electronic applications.

[Word count: 398]

10个与MMSZ5263B-7-F在技术解决方案中的应用相关的常见问题及解答

  1. What is the MMSZ5263B-7-F?

    • The MMSZ5263B-7-F is a Zener diode with a voltage of 3.6V and a power dissipation of 500mW.

  2. What are the typical applications of MMSZ5263B-7-F?

    • It is commonly used in voltage regulation, overvoltage protection, and signal clamping applications.

  3. What is the maximum power dissipation of MMSZ5263B-7-F?

    • The maximum power dissipation is 500mW.

  4. What is the voltage tolerance of MMSZ5263B-7-F?

    • The voltage tolerance is typically +/-5%.

  5. What is the operating temperature range of MMSZ5263B-7-F?

    • The operating temperature range is -65°C to +150°C.

  6. How does MMSZ5263B-7-F provide overvoltage protection?

    • It conducts current when the voltage across it exceeds its breakdown voltage, effectively shunting excess voltage away from sensitive components.

  7. Can MMSZ5263B-7-F be used for voltage regulation?

    • Yes, it can be used to stabilize voltage levels within a circuit by maintaining a constant output voltage.

  8. What is the reverse leakage current of MMSZ5263B-7-F?

    • The reverse leakage current is typically very low, ensuring minimal impact on the overall circuit performance.

  9. Is MMSZ5263B-7-F suitable for signal clamping applications?

    • Yes, it can be used to limit the amplitude of a waveform by clipping or clamping it to a specific voltage level.

  10. What are the key considerations when integrating MMSZ5263B-7-F into a technical solution?

    • Factors to consider include the maximum power dissipation, voltage tolerance, operating temperature range, and the specific requirements of the application.