图片可能具有代表性。
产品详情请参阅规格.
AD8218BRMZ-R7

AD8218BRMZ-R7

Product Overview

Category

The AD8218BRMZ-R7 belongs to the category of integrated circuit (IC) amplifiers.

Use

This product is primarily used for current sensing and monitoring applications.

Characteristics

  • High accuracy and precision in current measurement.
  • Wide input voltage range.
  • Low power consumption.
  • Small form factor.
  • Suitable for both AC and DC current measurements.

Package

The AD8218BRMZ-R7 comes in a miniature 10-lead MSOP package.

Essence

The essence of this product lies in its ability to accurately measure and monitor current in various applications.

Packaging/Quantity

The AD8218BRMZ-R7 is typically packaged in reels, with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Input Current Range: ±50A
  • Gain Error: ±0.5%
  • Bandwidth: 200 kHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. VCC: Power supply pin.
  2. GND: Ground reference pin.
  3. IN+: Positive input pin for current measurement.
  4. IN-: Negative input pin for current measurement.
  5. REF: Reference voltage output pin.
  6. OUT: Amplified current output pin.
  7. SET: Gain setting pin.
  8. NC: No connection.
  9. NC: No connection.
  10. NC: No connection.

Functional Features

  • High common-mode rejection ratio (CMRR).
  • Low offset voltage and drift.
  • Built-in overcurrent detection.
  • Programmable gain settings.
  • Fast response time.

Advantages

  • Accurate and precise current measurement.
  • Wide operating voltage range allows for versatile applications.
  • Compact size enables integration into space-constrained designs.
  • Suitable for both AC and DC current sensing.
  • Built-in overcurrent detection enhances system safety.

Disadvantages

  • Limited input current range compared to some alternative models.
  • Higher cost compared to certain lower-end current sensing solutions.
  • Requires external components for proper operation.

Working Principles

The AD8218BRMZ-R7 utilizes a differential amplifier configuration to measure the voltage drop across a shunt resistor connected in series with the current path. This voltage is then amplified and converted into a proportional current output. The gain of the amplifier can be adjusted using the SET pin, allowing for flexibility in different applications.

Detailed Application Field Plans

  1. Power management systems: The AD8218BRMZ-R7 can be used to monitor current consumption in power supplies, enabling efficient energy management and fault detection.
  2. Motor control: By measuring the current flowing through motor windings, this product facilitates precise control and protection of motors in various applications.
  3. Battery monitoring: Current sensing is crucial in battery management systems to ensure optimal charging and discharging processes, as well as to prevent overcurrent conditions.
  4. Industrial automation: The AD8218BRMZ-R7 finds application in industrial machinery, where accurate current measurement is essential for process control and equipment protection.

Detailed and Complete Alternative Models

  1. INA219: A highly integrated current sensing IC with I2C interface.
  2. ACS712: Hall effect-based current sensor module with analog output.
  3. MAX4080: Precision high-side current-sense amplifier with adjustable gain.
  4. LT6105: High voltage, high-side current sense amplifier with wide input voltage range.

(Note: These alternative models are provided for reference and may have different specifications and features compared to the AD8218BRMZ-R7.)

In conclusion, the AD8218BRMZ-R7 is a versatile and accurate current sensing IC that finds application in various fields, including power management, motor control, battery monitoring, and industrial automation. Its compact size, wide operating voltage range, and built-in features make it a reliable choice for current measurement requirements.

10个与AD8218BRMZ-R7在技术解决方案中的应用相关的常见问题及解答

Sure! Here are 10 common questions and answers related to the application of AD8218BRMZ-R7 in technical solutions:

  1. Q: What is the AD8218BRMZ-R7? A: The AD8218BRMZ-R7 is a high-precision, bidirectional current shunt monitor IC.

  2. Q: What is the purpose of the AD8218BRMZ-R7? A: The AD8218BRMZ-R7 is designed to accurately measure current flowing through a shunt resistor in various applications.

  3. Q: What is the voltage range supported by the AD8218BRMZ-R7? A: The AD8218BRMZ-R7 supports a voltage range of -0.3V to +26V.

  4. Q: What is the typical accuracy of the AD8218BRMZ-R7? A: The AD8218BRMZ-R7 has a typical accuracy of ±0.5% over the temperature range of -40°C to +125°C.

  5. Q: Can the AD8218BRMZ-R7 measure both positive and negative currents? A: Yes, the AD8218BRMZ-R7 can accurately measure both positive and negative currents.

  6. Q: What is the maximum common-mode voltage that the AD8218BRMZ-R7 can handle? A: The AD8218BRMZ-R7 can handle a maximum common-mode voltage of 65V.

  7. Q: Does the AD8218BRMZ-R7 require an external amplifier? A: No, the AD8218BRMZ-R7 does not require an external amplifier as it has a built-in differential amplifier.

  8. Q: Can the AD8218BRMZ-R7 be used in high-frequency applications? A: Yes, the AD8218BRMZ-R7 is suitable for high-frequency applications with a bandwidth of 1 MHz.

  9. Q: What is the supply voltage range for the AD8218BRMZ-R7? A: The AD8218BRMZ-R7 operates from a single supply voltage range of 2.7V to 5.5V.

  10. Q: Are there any evaluation boards available for the AD8218BRMZ-R7? A: Yes, Analog Devices provides an evaluation board (AD8218-EVALZ) that can be used to test and evaluate the AD8218BRMZ-R7 in different applications.

Please note that these answers are general and may vary depending on specific application requirements.